OBD2Tuning - China Auto Diagnostic Tool Supplier, OBD2 Tuning Tool, ECU Chip Tuning, OBD2 Scan Tool

Online Coding
Home >  news & Notice >  How to solve GM MDI GDS2 Software Can Not Communicate with Wifi GM MDI Scanner

How to solve GM MDI GDS2 Software Can Not Communicate with Wifi GM MDI Scanner

GM MDI China Clone is GM MDI scanner GM tech 3 MDI. GM MDI China without wifi with Installed GM mdi gds2 tech 2 win software. China GM MDI scanner installed GM mdi gds2 tech 2 win software HDD work for Vauxhall Opel/Buick and Chevrolet. 


Solution of GM MDI GDS2 software Can not communication wifi gm mdi scanner:

 

Check that the cables are securely attached to the MDI, the MDI has completed its power up sequence, the connector pins are clean, and the MDI Manager software is running.

1). If connecting using USB, check that the Wifi GM MDI tech 3 USB connection is detected by Windows.

a. Connect the MDI to the PC USB port, then power up the MDI.

b. From the Windows Control Panel, open the Network and Dial-up Connections window.

c. Check for device name ETAS USB Remote NDIS Network Device. If not running, then either the USB driver has not been loaded on the PC or the MDI is not powered and connected to the USB. Check all USB ports on the PC and verify that the MDI is powered on.

2). If connecting using wireless internet, make sure that wireless communication is enabled and the IP configuration is properly set using the obd2tuning.com GM MDI Manager software.

a. Check that the USB cable is not plugged in. USB connection takes precedence over wireless.

b. Check that the GM MDI scanner from obd2tuning.com is not being used via wired  internet. Wired Ethernet connection takes precedence over wireless.

c. Check that the wireless card is properly seated in the MDI.

d. Contact your IT department and check that your PC is detecting the wireless access point and the correct security settings have been configured for the MDI.

3). If connecting using wired internet, make sure that wired internet communication is enabled and configured using the MDI Manager software.

a. Check that the USB cable is not plugged in. USB connection takes precedence over wired internet.

b. Check that the Wifi GM MDI device detects wired internet activity by viewing the lights blinking on the wired internet port of the MDI.

c. Contact your IT department and check that the MDI and the PC are on the same subnet..

Product Linkage:

Webset Address:


http://www.obd2tuning.com/


Contacts:


Email: sales01@obd2tuning.com


Skype: sales01@obd2tuning.com


Whatsapp:+8615814697230

Review List

Leave your comment

Email will not be published
所有页面BOTTOM广告banner最上面