Cart
Item
Top 4 Reasons to get CGDI Prog MB:
How to activate CGDI Prog MB?
3. Pass serial number to our customer service, when activation is done, please restart CGDI Prog Benz and the Benz Monster software, it will be ready to use.
CGDI MB Mercedes Benz Key Programmer V2.6.0 Newest Update Info (2018-06-02):
1. Add ELV emulator function: support one-click unlock / read & write data / read password.
2. Add ELV password writing directly without erasing EIS and synchronize.
3. Add OBD mileage reset function for the following cluster types:
C(W204) / GLK(X204) / CLK (207) / E(W212) / SLS (197) / CLS (W218), R-Class (W251) /GL(X164) /ML(W164), E-Class (w211) /CLS(W219), S-Class (W221) /CL(216), C-Class (W203) / CLK(W209), SLK(R171).
4. Add the gateway EE /Flash OBD reading and writing for the following gateway types:
C_Class_W204, E_class_W211, E_class_w212, CLK_X204, CLK_W207, SLS_W197, CLS_W218, M-Class_W164, R_class_W251, Slk_R171, GL_X164, S_class_W221, CL_W216.
5. Add the non-HC05 EIS format file and the original data type save function, so that you can complete modifying the Mercedes EIS data by clicking one button.
6. Fix the problem that a partial BE keys fail to read after writing.
7. Add a button to clear the fault code.
8. Fixed the problem that part of the ISM can not erase;
9. Fixed the problem that some EIS data loading error;
10. Add consumption points to calculate key password mode.
Consumption points do not have the device expiration limit, when the device expires, it can still be calculated with consumption points. Points will be in the company launched a variety of activities to be obtained, everyone stay tuned!
CGDI MB 2.5.0.0 Update (2018-03-13):
1. Add ELV repair function, including: enable ELV, virgin ELV (repair damage ELV chip)
2. Add the function of BE key to save file directly
3. Add W205, W218,W166 FBS4 EIS type detection
4. Add save EIS data format flags.
5. Fixed the problem of part of the ECU,TCU,ISM/DSM/ESM cannot erase
CGDI MB Benz Monster updated 2.4.0.0 2017/12/29
1. Add activation Key function
In the case that the EIS cannot activate the key and the key lamp steady, it can be activated manually with the Benz Monster.
2. Add detection FBS4 key type function
Currently do not support the acquisition, engineers are being overcome, please look forward to.
3. Add View wiring diagram function (Menu-Wiring Diagram)
Contains EIS, ELV, ECU, ISM, TCU wiring diagram.
Download: https://www.dropbox.com/s/grcy0cz2vaw651s/BenzMonster_2.4.0.0_Setup.exe?dl=0
Benz Monster 2.0.0.0 2017/11/11 Update Info:
1. Calculate the erase password function (including the engine computer, ISM computer, EGS computer, ELV)
2. Calculate the key to enable the password function (you can directly use the disable key)
3. Erase the lock function (support CAN protocol, K-line protocol)
4 write lock data function
5. Write frame number function
6. Activate the lock function
7. Clear the TP protection function
8. Calculate the key current track code function
9. Add to determine whether the dealer lock
10. Fix problems that can cause the program to crash under certain conditions
11. Optimization part pop-up prompt box to enhance the stability of the program
12. increase some tips, the operation experience more accurate
CGDI MB Prog Function List:
Able to add keys on Mercedes Benz and program a new key when all keys are lost.
Add new Mercedes Benz keys: Data acquisition for 1 minute 50 seconds, pin code for 40 seconds and 99% success.
Program a new key to the following models when all keys are lost: 211, 209,204, 207, 212, 166,246,197,172,164+, 216 etc.
EIS/EZS Function:
Infrared Key Function:
How to Use CGDI MB Programmer Add Key for Benz?
CGDI Prog MB is able to add Mercedes Benz car keys as well as program new keys when all keys are lost.
Step 1: Click on “Lock (EIS)
Step 2: Click on “Read EIS data”
Step 3: Click on “Computer Password”, then click on “Copy key with key”
Step 4: Click on “Other Keys” (One generation of key 705E6 key), then click on “OK”.
Step 5: Please insert the key into EIS and click OK.
Step 6: Please insert the key into the device and click on OK!
Step 7: Collecting the data, do not remove the key.
Step 8: Please insert the key into EIS and click OK.
Step 9: Please wait for 7 seconds.
Step 10: Please pull out the key from the EIS, and then click OK!
Step 11: Please insert the key into the EIS again and click OK!
Step 12: Unplug the key for 5 seconds, then insert the EIS, then click OK!
....
Step 34: Select chip type.
Step 35: Note: Smart key please choose 41 format, common key and BE key please choose 51 format!
Step 36: Select the location of writting key, then click on “Open”.
Step 37: CGDI MB Write key success!
Step 38: Password display area, write down the password manually.
BE key read password directly, no need to collect data!
CGDI MB Prog Package List:
1*CGDI MB Multiplexer
1* NEC Key Adapter
1*IR Adapter
1*OBD Cable
1*USB Cable
Contacts:
Email: [email protected]
Skype: live:sales005_137
WhatsApp:+86-15814697230
Warranty: one year free
After-sales service: Free Technical Support
Order status track:
1. login your account
2. contact our online support